banner

News Center

How to install the basin faucet

2020-05-25


8-1.jpg


1. The first thing we need to do is to carefully read the installation instructions of the bathroom washbasin faucet you bought. Follow the steps given by it step by step. Of course, the installation of this type of bathroom washbasin faucet must be careful not to connect the cold and hot water pipes, and the gas and solar water heaters cannot use thermostatic faucets. There is also a need to install cold and hot water filters.


2. To install a shower faucet, you must first choose a suitable height for the faucet, and the distance between the hot and cold water pipes must reach 15 cm. Before installing, remember to rinse the water pipe. Inside the wall, and the plastic protective cover of the spool cannot be removed to avoid damage to the spool


3. Our frequency of use of this bathroom washbasin faucet is also high, and our requirements for it are also strict.First of all, when we buy this type of bathroom washbasin faucet, we should pay attention to the diameter of the water outlet and the height of the reserved water outlet. Generally, it is suitable to divide 35 working hours from the basin.


4. When installing this type of bathroom washbasin faucet, it should be noted that a special angle valve must be selected, and the angle valve should be fixed with the hot and cold water pipes out of the wall. If there is a distance between the angle valve and the water pipe of the faucet, it is necessary to purchase a special extension pipe to connect; if the inlet pipe exceeds the length of the outlet pipe, it is necessary to cut off a part as needed.


Copyright © Kaiping Cheston Sanitary Ware CO.,Ltd.  Tech support: jiangmen hua qi cubic technology co., LTD